JT-R2420A 2.4GHz RFID Omnidirectional Ceiling Indoor Reader

JT-R2430A is a self-developed high-performance 2.4G electronic tag fixed reader. With complete independent intellectual property rights, the reader's default working frequency band is 2.4GHz, with strong multi-tag recognition capabilities, long reading distance, high protection performance, and convenient installation and configuration.

Item No. JT-HC500 Performance Data Communication Octa-core WLAN 4G: TD-LTEBand38/39/40/41FDD-LTEBand1,2,3,4,7,17,20 CPU Quad-core 64-bit Coretex-A53, clocked at 1.3GHz 3G: WCDMA (850/1900/2100MHz); RAM+ROM 2GB+16GB 2G: GSM/GPRS/Edge Expansion Support 128GB MicroSd card (850/900/1800/1900MHz) Operating System Android 7.0 WIFI 2.4G/5G dual frequency, in line with IEEE802.11a/b/g/n Physical Characteristics 2.45GHz RFID Dimensions 170×85×23±2mm Card reading frequency band 2.45GHz Weight Net Weight :400g (including battery&wrist strap) Card reading distance 0-100 meters (adjustable) Display 5-inch IPS high-definition screen, resolution 720*1280 * Ranges and rates depend on tags and environment Touch screen Corning Gorilla third-generation industrial-grade multi-touch capacitive screen Expansions 1 sim card slot, 2 PSAM card slots Communication Interface Interface High-speed USB2.0 device end interface 3.5 stick plug charging port Indicator light Network indicator, charging indicator Keyboard Scan key, function key Webcam Rear 8 million pixel camera with flash, auto focus function Flashlight Low-power LED lighting for emergency use GPS Built-in GPS global positioning system for navigation, error range ±5m

JT-306-1 RFID windshield tag is specially designed for vehicle entry and exit management. This etc car electronic label is attached to the front windshield inside. The leading design can resist the interference of the heat insulation explosion proof film, which can make the tag work stable. This UHF RFID windshield tag also has fast reading speed, supports multi-tag identification, tamper proof and other advantages.

The JT-T0258  is a cross-line polarized directional antenna. When using it, care should be taken to adjust the tilt angle of the antenna to obtain optimal read performance. JT-T0258 can be used outdoors, but not suitable for use in acid/alkaline environments.

RFID UHF 3D Function Adhesive Label designed for apparel management,Airport luggage tracking, logistics management,assets management,etc.

JT-7100 is industrial design, sturdy and durable, in line with the harsh industrial production lineenvironment, the protection level reaches IP66. RFuses proprietary intellectual property research and development chips with high-performance label recognition algorithm Software intelligent monitoring of the working state, 24 hours X 365 days of operation does not crash. The bottom cover is designed to install iron pieces, which is convenient for industrial production line environment installation and reader installation.Small size and light weight, easy to integrate industrial production line equipment. Support  EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C RFID tag.

R2000 reader module JT-918B, as a high efficiency and low cost, UHF  tag  reading/writing  module,  has independent Intellectual Property Rights. It works under the frequency from 860MHz-868MHz or 902MHz-928MHz. With 8dBi antenna,reading range can be reached 10m or longer. It is easy and fast to build an RFID system with simple power supply and interface.