JT-HC706 2.45GHz Portable Android Active RFID Reader

JT-R2430A is a self-developed high-performance 2.4G electronic tag fixed reader. With complete independent intellectual property rights, the reader's default working frequency band is 2.4GHz, with strong multi-tag recognition capabilities, long reading distance, high protection performance, and convenient installation and configuration.

2.4GHz RFID reader. Data transmission module with integrity structure and full-function. It includes RF Module,central control unit, input/output ports, Ethernet module, serial communication interface, non-volatile memory modules and working status indication module and built-in antenna etc.

>> Product Parameters Basic model JT-E001- FDX Chip type EM4305 (EM Marin) Function readable and writable Memory Capacity EEPROM 512bit USER DATA 288 bit ID number 1 5 -digit ID code Working frequency 134.2KHZ ± 1KHZ _ Protocol ISO 11784/85 (FDX-B) Data retention time > 10 years at 55°C (131°F) Number of data rewrites >100,000 times at 25°C (77°F) Power supply passive (no battery) Recognition distance 1 to 55 cm (centimeters) EEPROM storage structure: 512 bit EEPROM is made up of 16 32bit . EEPROM Words are numbered from 0 to 15. Word 0 : Assigned to the factory pre-written information. Word 1 : It is a 32-bit unique identification code (UID) written by the factory. Word 2 : Contains a 32-bit password. The password value can only be changed after a successful login command. Word 3 : User data storage area, which can store user-specific information. Word 4 : Used to define configuration words - operating modes and options. Word 4 – Word13 : User data storage area, which can store user-specific information, a total of 2 88 bits space Word 14 – Word 15 for word protection 0 to 13 use the Write Word command to modify

Each rfid animal ear tag is equipped with an RFID (radio frequency identification) chip, that transmits a signal. Antennas mounted on the feeding troughs will pick up that signal when the cow comes to feed, with a computer keeping track of the amount of time that elapses until the signal is lost when the cow leaves. In this way, the system can keep track of which cows are eating regularly, and that they're getting enough to eat when they do.

The JT-T0258  is a cross-line polarized directional antenna. When using it, care should be taken to adjust the tilt angle of the antenna to obtain optimal read performance. JT-T0258 can be used outdoors, but not suitable for use in acid/alkaline environments.

Anti-metal tag is a special anti-magnetic absorbing material encapsulated into the electronic label, from the technical solution to the electronic tag can not be attached to the metal surface of the problem. Products can be waterproof, anti-acid, anti-alkali, anti-collision, can be used outdoors. Attaching a metal-resistant label to a metal gives good read performance, even farther than reading it in the air. The use of special circuit design, the electronic tag can effectively prevent metal interference on the RF signal, the real anti-metal tags outstanding performance is: attached to the metal read distance than the metal does not read farther, this is the whole Design of the outstanding achievements. The use of recyclable concept, providing metal adsorption with a magnet function; high stability, cost-effective, personalized printing and bar code printing.

4-port antenna TNC female interface, TM serial chip , group reading