Reading 1 tag at a time; Reading range 0-1m (with JT-T0040 ceramic antenna & JT-A8554 RFID card)
Brand:
JTSPEEDWORKItem NO.:
JT-2850Communication Interface
Uart TTLWorking frequency:
860-960MHzProtocol:
ISO18000-6CFeature:
◆ Working voltage range DC 5V/1A;
◆ Low power output, less than 0.5W;
◆ Can support two-way UART communication: one for RS485, other for RS232 communication;
◆ Can built-in handheld device, PDA;
◆ Using for Asset management, Staff management, etc.
| Item No. | JT-2850 | |||
| Physical parameters | Power Supply | |||
| Dimensions | 41.5(L)*25(W)*3(H) mm | Power supply | +5V | |
| Peak current | 60mA(DC12V) | |||
| RFID parameters | ||||
| Air Protocol | User Environment | |||
| EPC global Gen2(ISO18000-6C) | Operating Temp. | -45 ℃ to 90 ℃ | ||
| Working frequency | Storage Temp. | -45 ℃ to 90 ℃ | ||
| 865-868 / 920-925 / 902-928 MHz ( custom-design for frequency band ) | Humidity | 5-90% non-condensing (+25° C ) | ||
| RF power | ||||
| 0~18 dBm(±1dBm) (adjustable) | Reading Performance | |||
| Antenna interface | Reading distance | |||
| 1 way IPEX | Up to 1m(with JT-T0040 ceramic antenna and JT-I9662 tag) | |||
| Communication interface | Write range | |||
| Uart(TTL) | 0-30cm | |||
| UART communication | ||||
| 2 way (1 way for RS232, 1 way for RS485) | Datasheet | |||
| FM mode | ||||
| Hopping / Fixed | SDK(download link) | |||
| C# , Java , C++ | ||||
Next:
JT-2510 UHF RFID Reader Writer Module Single Port Assembly Line Induction 900 Mhz RFID Reader ModuleIf you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
JT-6210 0-1m UHF RFID Desktop USB Reader Writer ISO18000-6C Read More
JT-7100 0-3m 860-960MHz UHF RFID Industrial Grade RFID Reader Read More
JT-8380 0-6m UHF RFID 860-960MHz Middle Range Integrated Reader Read More
JT-P983 Industrial Tablet Pad RFID Handheld Reader Grade Long Range Android UHF Terminal Bluetooth RFID Reader For Warehouse Read More
JT-1550 Small Mini HF RFID 13.56MHz Module ISO14443A ISO 15693 Protocol Read More
Group reading >200 tags/sec; Reading range up to 0-25m;1-4 SMA antenna ports;
Each rfid animal ear tag is equipped with an RFID (radio frequency identification) chip, that transmits a signal. Antennas mounted on the feeding troughs will pick up that signal when the cow comes to feed, with a computer keeping track of the amount of time that elapses until the signal is lost when the cow leaves. In this way, the system can keep track of which cows are eating regularly, and that they're getting enough to eat when they do.
Each rfid animal ear tag is equipped with an RFID (radio frequency identification) chip, that transmits a signal. Antennas mounted on the feeding troughs will pick up that signal when the cow comes to feed, with a computer keeping track of the amount of time that elapses until the signal is lost when the cow leaves. In this way, the system can keep track of which cows are eating regularly, and that they're getting enough to eat when they do.
Reading distance : 0-50cm; Working frequency ：860-960MHz; Protocol : ISO 18000-6C.
JT-306-3 with special substrate is a non-transferable tamper-proof label for vehicle windshields. for the purpose of vehicle identification and electronic toll collection. Supplied in roll form as finished label with pre defined encoding the tag allows additional data encoding as per requirements specified.
Copyright © 2025 Shenzhen Jietong Technology Co.,Ltd. All Rights Reserved.
IPv6 network supported
English
