JT-D3020 UHF RFID Animal Foot Ring Tag For Chicken Duck Pigeon

Each rfid animal ear tag is equipped with an RFID (radio frequency identification) chip, that transmits a signal. Antennas mounted on the feeding troughs will pick up that signal when the cow comes to feed, with a computer keeping track of the amount of time that elapses until the signal is lost when the cow leaves. In this way, the system can keep track of which cows are eating regularly, and that they're getting enough to eat when they do.

Tracking identification management, data statistics, automatic feeding, behavior management of animal husbandry, such as cattle, sheep, pigs and other livestock. When installing, use special animal ear tag forceps, etc. to install the tag on the animal ear tag, and then it can be used normally.

Group reading >200 tags/sec; Reading range up to 0-25m;1-4 SMA antenna ports;

Feature:     JT-1288 is a high-performance single-channel integrated RFID reader. Using self-developed high-perfor-mance RFID modules based on Impinj E710 chips, and working together with integrated awesome 10dBilinear polarized antenna. The reader supports RS232, RJ45 ,WiFi,4 GPRS communication interfaces. Thewhole series of products have a unified protocol and SDK. You only need to develop our products onceto connect with all our RFID readers.JT-1288 is applicable widely in warehousing, archives management,library management, banking, production line management and other fields. Support RS232,RJ45,WiFi,4G remote online firmware upgrade Support MQTT protocol Specification: Item No. JT-1288 Physical parameters Antenna Dimensions 420(L)*240(W)*50(H)mm 10dBi linear polarized antenna Net weight 1.3Kg Material ABS & aluminum alloy Power Supply Input Voltage DC 12-24V /3A RFID Parameters Peak current 500mA Air Protocol EPC global Gen2(ISO18000-6C) User Environment Working frequency Operating Temp -40 ℃ to 75 ℃ 865-868 / 920-925 / 902-928 MHz ( custom-design for frequency band ) Storage Temp -40 ℃ to 85 ℃ RF power Humidity 5-90% non-condensing (+25° C ) 13~33dBm(adjustable) Chip Reading Performance Impinj E710 Reading distance I/O Up to 15m(relate to tag and environment) 1 trigger input or 2 relay outputs (customized) Model Type Notification JT-1288B RS232,TCP/IP(PoE optional) LED indicator,buzzer JT-1288W RS232,TCP/IP,WiFi RSSI JT-1288G RS232,TCP/IP, 4 GPRS Supported Consumption Datasheet Average power consumption<10W Baud rate SDK 115200 bps (default) Demo&C++,C#,JAVA,Android SDK

RFID automatic calibration The RFID automatic calibration function can automatically drive the power of the antenna according to tags of different specifications and chips, easily set the reading and writing conditions of RFID tags, and greatly reduce the time of manual debugging of printer parameters. (Press the "Power On" button twice to automatically calibrate the RFID power) Automatic labeling function for waste labels The automatic marking function of discarded labels means that when a defective or damaged label is found during the label reading and writing process, the printer can automatically detect and print the word "obsolete" on the surface of the label, which facilitates customers to sort out defective labels as soon as possible and avoid the mixing of defective labels. Reliable tag data writing The workflow of printing first and then reading and writing the label IC can support the printing, reading and writing of large batches of labels at one time, while ensuring a 100% defective label detection rate and ensuring the accuracy of subsequent business operations. Labels are widely applicable It can support printing and reading and writing verification of ordinary anti-metal labels and flexible anti-metal labels (≦1.25mm) at the same time. The labels are widely applicable. The three-position penetrating sensor structure design can meet the label positioning needs of different positioning methods, meet the use of different labels, and the label has a wider application range. Humanized parameter settings Provides an intelligent assistant setting function that can manually adjust the printer's RFID power and antenna position, providing the most suitable application settings for RFID. Item No. JT-DL630 Print parameters Physical properties Printing method Thermal/thermal transfer printer Dimensions 230(width) ×290(Deep) ×176(high)mm Printing width (loading paper width) 106mm Color Black Printing speed 102mm/s(300dpi) Weight About 3kg Thermal head Point spacing 0.084mm Working environment Temperature: 5~40℃ Resolution 300DPIx300DPI Humidity: 20%~95%RH (no condensation) Storage environment Temperature: -20~60℃ Humidity: ≤95%RH (40℃, no condensation) Barcode RFID 1D code ZPL:Code11; Interleaved 2 of 5; Code 39; Code 49; Planet Code;EAN-8; EAN-13; UPC-E;UPC-A; Code 93;  Code 128;Industrial2 of 5; Standard 2 of 5;Codabar;  MSI; Plessey RFID tag writing method Print first and then write, which can support printing and writing to EPC at the same time, only reading and writing EPC, printing only, and reading label TID, etc. QR code PDF417; CODABLOCK; Maxicode; Aztec; QR Code ; Data Matrix Support RFID standards 920.5-924.5MHz; support ISO18000-6C, EPC Gen2 Supported label types Supports ordinary self-adhesive RFID and flexible anti-metal tags below 1.25mm *Special tags depend on the specific chip Character Ribbon specifications Character set Chinese character GB18030 Chinese character  library 24*24Bit map,commonly used single-byte fonts(ZPL):FontA,FontB,FontD,FontE,FontF,FontG, FontH,FontV0,FontGS,FontP,FontQ,FontR,FontS, FontT,FontU,FontV Inner diameter 25.4mm Custom fonts can be downloaded to FLASH, SDRAM Outer diameter 68mm Code page PC850;PC1250;PC1252;PC1253;PC1254;PC1255 Length 300 meters Zoom/Rotate It can be enlarged in steps of 1 to 8 times both  horizontally and vertically; rotation printing (0° ,90°, 180°,270° ) Width 33~110mm Paper handling Interface Paper specifications Paper thickness: 0.06~0.254mm Standard configuration USB interface (2.0 full speed) Paper width: 25~118mm Optional RS-232 serial port (DB25) Paper length: 8.9~400mm Parallel Centronics(IEEE-1284) Outer diameter: 127mm(MAX) Ethernet port:10M/100M Inner diameter: 25.4/38.1mm Wi-Fi interface (802.11b/g/n) Paper type Roll type, folding type (continuous paper,  non-continuous paper, continuous tag,  wristband, ordinary paper or various bills) Bluetooth interface: SPP Paper separation method Manual tearing, automatic cutting, and peeling  methods Power parameters Detection function Input 100~240VAC;Frequency range: 50~60Hz Standard sensor Black mark detection, label detection, mechanism detection, ribbon detection Output 24VDC; 2.15A Optional sensor Label peel detection Memory Safety SDRAM 16MB Safety standard GB4943.1-2011 FLASH 8MB Radio Interference (EMC) Class B Certification 3C, UL, FCC, CE, Energy Star Software Reliability and warranty Driver (Windows32bit/64bit, Linux), Barcode Pass BarEasy,SDK system Thermal head Lifespan 150KM(Calculated based on the use of designated thermal paper and a printing rate of 12.5%) Graphics Emulation language Graphics processing Graphics processing monochrome PCX BMP Image  data can be downloaded to SDRAM Simulated zebra,Simulate EPSON ZPL,EPL,TSPL Options Control Panel Cutter, stripper Button One key (paper feed) Indicator light Three lights (power, fault, status (no paper/ribbon))

Product Name RFID Smart Weighing Rack Operating System Android Screen Size 15.6-inch touch display Shelf Size 1997*600*2000MM(L*W*H) Single layer size 1800*600*390MM(L*D*H) height adjustable Operating Frequency UHF 840MHZ-960MHZ or LF 13.56MHZ can be done according to project requirements. Network Mode 4G/WIF1/Ethernet Recognition mode Support face recognition, fingerprint, code scanning, password verification to open the door. Product Function RFID weighing shelf combines RFID technology and weighing technology intelligent storage equipment. Intelligent shelves record real-time goods in and out of the warehouse, and at the same time, combined with the weighing function, it can accurately measure the weight of the goods, and realize the automatic management and monitoring of the inventory.

7015 flexible washing label, especially suitable for clothing and fabric washing, install it in the linen, can withstand 180 degrees high temperature resistant ironing, industrial washing more than 200 times.