RFID Traceable Cable 6C Tag

It is compliant with EPC C1G2 (ISO18000-6C), mainly applied to warehouse logistics management, IT asset management, inventory management, assets management, automotive component tracking, industrial manufacturing, etc

The tag is a high performance radio frequency identification (RFID)  tag designed  specially  for mount on metal or applications where environmental extremes or exposures  are required

1, Reusable, reduce costs 2, It's can be used for metal surface 3, FR-4 material, wear-resistant 4, Long distance

The real anti-metal tags outstanding performance is: attached to the metal read distance than the metal does not read farther, this is the whole Design of the outstanding achievements.The use of recyclable concept, providing metal adsorption with a magnet function; high stability, cost-effective, personalized printing and bar code printing. It is widely used in precious metals management, e.g.bank asset management, data center asset management, IT asset management.

Logistics RFID Tag,UHF RFID metal tag JT-8020, it is disgined for metal object.

Anti-metal tag is a special anti-magnetic absorbing material encapsulated into the electronic label, from the technical solution to the electronic tag can not be attached to the metal surface of the problem. Products can be waterproof, anti-acid, anti-alkali, anti-collision, can be used outdoors. Attaching a metal-resistant label to a metal gives good read performance, even farther than reading it in the air. The use of special circuit design, the electronic tag can effectively prevent metal interference on the RF signal, the real anti-metal tags outstanding performance is: attached to the metal read distance than the metal does not read farther, this is the whole Design of the outstanding achievements. The use of recyclable concept, providing metal adsorption with a magnet function; high stability, cost-effective, personalized printing and bar code printing.

Multiple tags reading; Antenna gain 12dBi; Reading range: 0-30m Difference between JT-8290 and JT-9292: Model Main Chip Reading Performance JT-8290 Discrete Reading 1-2 rfid tags JT-9292 TM series chip Reading multiple tags

JT-9282 adopts the clip of Impinj R2000, which could achieve high speed and rapid date processing operation. Full support ISO-18000-6C(EPC C1 GEN2) protocol.  JT-9282 is easier to install for small size and light weight.  There will be flashing and buzzer when read tag.  JT-9282 could be used in variation area, such as vehicle management, customer management, logistic management and production automatic management, etc.